Compliance — Packaging

ISPM-15: When Wood Packaging Needs the IPPC Stamp

Of the five rule sets in this section, ISPM-15 is the one most often demanded in the wrong place. It says nothing about furniture. It governs the raw wood that furniture travels on — pallets, crates and dunnage — because untreated timber is an excellent way to ship insects across oceans.

The rule, briefly

ISPM-15 is the international standard for wood packaging material in trade. Solid wood packaging thicker than a few millimetres must be treated — heat treatment is the common route — and marked with the IPPC stamp, the wheat-sheaf mark that inspectors at destination ports look for. Unmarked solid-wood packaging can be held, treated at your expense or refused, depending on the port. Just as important is what sits outside the scope: processed wood materials such as plywood, particleboard and OSB are exempt because their manufacturing already destroys pests, and paper and cardboard were never in the frame at all. Debarking requirements and national variations exist, which is why the packing specification — not habit — should decide what a load is built on.

Two practical details decide most real-world cases. The stamp has to stay legible and visible after the load is wrapped — a treated pallet shrink-wrapped into invisibility can still draw an inspector's attention at destination, so marking placement is part of the packing instruction, not an afterthought. And treatment method matters to some buyers: heat treatment leaves no chemical residue, while fumigation raises its own questions for retail and food-adjacent warehouses. If your company has a preference, it goes into the same purchase-order line as the pallet specification itself.

What this means for a shelf shipment

Our shelves leave the factory as flat-packed export cartons: boards, bracket kits and fittings in cardboard, built for container loading as described in our packaging and loading guide. A load that stays in cartons, floor-loaded or on processed-wood pallets, has no ISPM-15 question to answer. The question appears when a buyer or a consolidator specifies solid-wood pallets — for warehouse racking compatibility, for example — or when timber bracing is used inside a container. Then the pallets and bracing are packaging in scope, and they need treatment and a visible stamp.

So the working rule is simple: settle it in the purchase order. Tell us the pallet type your warehouse expects. If solid wood is specified, the requirement for treated, stamped pallets goes into the packing specification for the order, and the packing list we issue before loading confirms the pallet type and the gross weights your forwarder will book against. Discovered at destination, the same fact costs a fumigation bill and a week. Written into the PO, it costs one line.

One neighbouring confusion to avoid: ISPM-15 is about pests in packaging, not legality of timber in products. A stamped pallet says nothing about the shelves on it, and an unstamped carton shipment is not "non-compliant wood" — the product-side rules are the Lacey Act and EUDR files, which live in a different drawer of the compliance hub.

Questions buyers ask first

Does ISPM-15 apply to the shelves themselves?

No. ISPM-15 regulates wood packaging material — pallets, crates, boxes and dunnage made from raw solid wood — because that is what carries pests between countries. The furniture inside the packaging is outside its scope. Confusing the two is common and leads buyers to demand stamps in places no inspector is looking for.

Our shelves ship flat-packed in cartons. Do we need to think about ISPM-15 at all?

Only if something in the load is raw solid wood. Cartons, paper and processed wood materials (plywood, particleboard, OSB) are outside the standard's scope. The moment cartons are stacked on solid-wood pallets or braced with solid timber, the packaging enters scope — so the question is settled by the packing specification, not by the product.

What should we write into the purchase order?

Specify the pallet type you want and, if solid wood is used, that pallets must be ISPM-15 treated and stamped, with the stamp visible after wrapping. We confirm the packing specification — cartons, pallet type, gross weights — in the packing list for your order before loading.

Pallet questions belong in the order, not at the port: put your packing specification in the inquiry, and read how we pack and load containers for the full picture.

Direct from our factory

Get wholesale pricing — and the catalog to go with it.

Wholesale pricing is quoted per inquiry, and the full product catalog is available on request. MOQ 500 pcs per SKU per color · standard lead time 2–4 weeks, custom 4–8 weeks · OEM/ODM and FBA white-label packing available.