Guides — Packing & Loading
Packaging and Container Loading for Shelf Orders
A floating shelf is nearly all surface — wide, flat and finished — which makes it efficient to ship and easy to damage in the attempt. This page covers how our cartons are built, what data comes with them, and how a container of mixed SKUs is loaded and documented.
Flat-pack is the product's natural state
A shelf set leaves the factory as boards, a bracket kit and fittings in one flat carton — nothing about the product wants to travel assembled. That flatness is the freight advantage: volume per unit stays low and predictable, which is why the honest comparison between suppliers is never the unit price alone but the unit price divided by the carton volume it travels in. The carton itself is an export build, not a retail gift box asked to survive an ocean: board edges and faces protected inside, hardware kits sealed and counted into the set, the carton labelled by SKU and finish on the outside so a warehouse can pick it without opening it. Private label orders carry the buyer's own box and inserts in the same structure — the branding layer changes, the protective logic does not. The standing packaging terms sit in the Information Center's packaging & labeling section.
Carton data travels with the quotation
Every quotation we issue carries carton dimensions and gross weight per SKU. Treat that as part of the price: with those two figures your forwarder can rate a full container against a part load, price the consolidation-warehouse route, and tell you the landed cost before you have committed to anything. Factories that quote a unit price and discover the carton size at packing time are asking you to buy freight blind. If a line in your order changes — a set of two becomes a set of three, packaging goes retail — the carton data is reissued with the revised quotation, so the numbers your forwarder works from are never a version behind.
Loading a mixed container
Most shipments mix SKUs: lengths, finishes, a solid-wood line riding with the panel range. The load is planned before the container arrives — heavy cartons low and forward, light and fragile-finished cartons protected above, the sequence arranged so part-loads for different warehouses can be separated at destination where the order calls for it. As the load is built it is photographed layer by layer, and that photographic record travels with the packing list. If a carton is crushed on arrival, the record shows where it sat and what sat on it; if a count is disputed, the record is the count. Palletising is available where your warehouse requires it, to the specification in your order — and if that specification says solid wood, read the ISPM-15 page before the purchase order is signed, because treated and stamped pallets are a specification decision, not a loading-day improvisation.
FCL versus LCL, finally, is mostly arithmetic wearing a strategy costume. A full container is cheaper per cubic metre and the goods are handled once at each end. A part load costs more per unit and passes through more hands, but it lowers the first commitment and pairs with delivery to a Guangdong consolidation warehouse under the terms in shipping & incoterms. Rate both from the carton data. Buyers who guess at this choice usually guess in the expensive direction.
Questions buyers ask first
Can several SKUs share one container?
Yes — most of our shipments are mixed. Each SKU keeps its own MOQ count and its own cartons; the load is planned heavy-to-light and layer-by-layer, and photographed as it is built, so the loading record and the packing list describe the same container.
How do we calculate freight before ordering?
Every quotation carries carton dimensions and gross weight per SKU. Your forwarder can rate FCL and LCL options from those figures before you commit — freight is bought on volume and weight, so we treat carton data as part of the price, not as an afterthought.
Do you palletise?
On request, to the pallet specification in your order. If solid-wood pallets are specified they enter ISPM-15 territory — treated and stamped — which is why the pallet decision belongs in the purchase order; our ISPM-15 page explains the rule.
FCL or LCL for a first order?
Volume decides most of it: a full container is cheaper per cubic metre and handled fewer times; LCL suits a smaller first commitment and pairs naturally with delivery to a Guangdong consolidation warehouse. Run both rates from the carton data in your quotation — the crossover point is arithmetic, not opinion.
Want the numbers for your configuration? Request a quotation — carton data comes with it, not after it.
Direct from our factory
Get wholesale pricing — and the catalog to go with it.
Wholesale pricing is quoted per inquiry, and the full product catalog is available on request. MOQ 500 pcs per SKU per color · standard lead time 2–4 weeks, custom 4–8 weeks · OEM/ODM and FBA white-label packing available.