Guides — Sampling

Sampling: What to Check Before You Commit to 500 Pieces

A sample is the cheapest inspection you will ever buy. It is also the most commonly wasted one — glanced at, photographed for a group chat, and approved — after which the bulk order is judged against expectations the sample was never actually tested for. Here is how we brief samples, and how buyers who get value from them put them to work.

Briefing the sample

Tell us the SKU or send the design. For a catalog piece that means the product, the finish and whether you want the retail packaging sampled with it — for private label buyers, this is when box artwork and inserts enter the process, because approving a bare shelf and a printed box in two separate months is how launch dates die. For a custom piece it means a drawing, a photo or a reference sample, plus the material — paulownia or pine as standard — and the dimensions that are fixed versus the ones you want our view on. The more of the final configuration the sample carries, the more of the order it can actually prove.

The five checks that matter

Dimensions against the drawing. Measure the piece, not the impression: length, depth, thickness, and the bracket spacing. Finish in your light. Colour reads differently under our workshop lamps and your showroom spots; judge it where it will be sold, next to the products it will sit beside. Bracket fit and the wall. Mount it — ideally on the wall type your customers have — and load it the way your listing photographs imply it can be loaded. The carton, opened cold. Have someone who has never seen the product unpack it and build the shelf from the carton contents and the manual alone. Every hesitation they have is a return your listing would have eaten. Handfeel. Edges, surface, weight in the hand: the qualities a photograph cannot carry and a review always mentions.

What a sample cannot prove is worth naming too. It cannot prove the board inside a panel shelf — that is the document chain, not the object. It cannot prove batch consistency across 500 pieces; it proves the standard the batch will be checked against, which is a different and more useful thing, provided the approval is recorded in specifics rather than in a thumbs-up emoji.

From approval to bulk

An approved sample becomes the reference standard for the order: production checks against it, our QC checks against it, and your pre-shipment inspection — ours or a third party's, per quality control — checks against it. Changes requested after approval are not refused; they are re-sequenced. A new finish restarts the finishing step, new artwork restarts the packaging step, and the lead time moves by what those steps cost, with the change stated at the time rather than discovered at the end. Sample cost and timing are quoted per item in the inquiry reply — a catalog piece and a custom build are different jobs, and a single published number would mislead both.

Questions buyers ask first

How much do samples cost, and how long do they take?

Both are quoted per item in the reply to your inquiry — they depend on whether the sample comes from a catalog design or a custom build, and on the finish and packaging you want checked. We would rather quote your actual sample than publish a generic number that fits nobody’s order.

Can we sample a custom design, or only catalog items?

Both. Catalog samples prove the production standard; custom samples prove your design — made from your drawing, photo or reference piece, in paulownia or pine for standard solid-wood work. Custom sampling is also where infeasible details surface while they are still pencil lines.

What if the sample is not right?

Then it has done its job. Tell us specifically what failed — dimension, colour under your light, bracket fit — and the revision is made against that note. What we ask is that feedback be as concrete as the checklist below; "make it nicer" cannot be produced, "2 mm shallower, finish one step warmer" can.

Does approving a sample lock us into an order?

No. Approval locks the specification, not your wallet. It means: if you order, this — dimension, finish, hardware, packaging — is the standard the run is produced and checked against, and the reference both sides point to if anything is disputed later.

Ready to put a piece in your hands? Request samples with your SKU list — custom work starts from the OEM/ODM page.

Direct from our factory

Get wholesale pricing — and the catalog to go with it.

Wholesale pricing is quoted per inquiry, and the full product catalog is available on request. MOQ 500 pcs per SKU per color · standard lead time 2–4 weeks, custom 4–8 weeks · OEM/ODM and FBA white-label packing available.